AlproJet-DD |Daily Cleaning & Disinfection For Dental Suction System (Aspirator) And Spittoon Bowl

Daily Maintenance of Dental Aspiration systems and Spittoon bowl

AlproJet-DD is a concentrated liquid .

All dental suction and Vacuum Aspiration systems With or without Amalgam separator.

It Cleans, Disinfects and Deodorizes


Alprojet-DD-daily cleaning and disinfection -dental suction systemIt is compatible with all materials .

It is Foam-free cleaning concentrate liquid for all types of suction system and amalgam separator


Efficacy :

  • bactericidal
  • yeasticidal
  • virus-inactivating 
  • Dissolves biofilm and prevents formation of sludge through blood and proteins
  • The solution for contaminated suction systems – provides reliable protection against infection
  • certified by VAH (Association for Applied Hygiene) /DGHM (German Society for Hygiene and Micro- biology), meets the DGHM requirements and EN-standards for the disinfection of instruments
  •  Recommended by leading equipment manufacturers because  , It has Certified material compatibility .

Features :

  • Aldehyde-free ,chlorine-free and phenol-free
  • Foaming  Free and cleaning disinfectant concentrate based on quaternary ammonium salts.
  •  High dirt-dissolving power towards deposits , saliva residues and drilling dusts.
  • Good material compatibility.
  • Even very low concentrations are sufficient to achieve rapid effectiveness.
  • Clean , Disinfect and Deodorize
  • Environmentally friendly.
  • Pleasant odor
  • Highly effective and fast at low concentrations.
  • Low application concentration (5%)
  • Highly intensive cleaning effect against deposits and sludge

Application For Dental Suction System :

For the reliable cleaning, disinfection and care it is recommended that  For one application , you should use 2 Liter  of a 5 % solution  .

  • Prepare 2 liter of Alprojet-DD  5 % solution  to be ready for use .
  • We Recommend the suction of Ready To Use Solution of 1 liter per treatment unit .
  • The Spittoon Bowel Must be disinfected with at least 250ml solution .

For 1 liter preparation ( 50 ml From Alprojet-DD + 950 ML warm water )

  • Alprojet-DD is used  1 – 2  times  per day (at noon and in the evening).
  • Let take effect for at least 10-30 minutes .
  • The disinfectant solution of  Alprojet-DD can remain in the system until the next restart of the assembly .

Rinse aspiration tubes and spittoon bowl thoroughly with water just before starting to work.
Please follow the manufacturer‘s instructions as .

We Recommend Rinsing the system with  at least 2 liter cold water prior to the first patient and following the expiry of the exposure time .

Spittoon Bowl can be cleaned and disinfected  with other Surface disinfectant  solution or wipes ( Minuten wipes or PlastiSept Wipes  OR Alprocleaner solution

 

GUARANTEED SAFE CHECKOUT

Description

AlproJet-DD is a concentrated liquid preparation for the cleaning as well as maintenance of all dental suction  and Vacuum  Aspiration systems With or without Amalgam separator.

Daily Maintenance of Dental Aspiration systems and Spittoon bowl Too .

It Cleans , Disinfects and Deodorizes

Alprojet-DD-daily cleaning and disinfection -dental suction system

 It is compatible with all materials and recommended for all types of Suction systems

Moreover, It is Foam-free cleaning concentrate for all types of suction system and amalgam separator

Alprojet-DD For Daily Cleaning And Maintenance of Dental Suction units .

Disinfecting liquid concentrate , for the daily cleaning and maintenance of dental aspiration systems with and without amalgam separator.

Alprojet-DD-Daily cleaning and Disinfection -dental suction system

Alprojet-DD has appropriate action times – whether rapid or more prolonged – based on the specific requirements of the equipment involved.

Finally , Approved amongst others by Dentsply Sirona.

Alprojet-DD Has  Triple Actions for Dental Suction System 

It cleans , disinfects and deodorizes .

The product contains active substances that were carefully selected and blended together to achieve synergistic effect against bacteria, fungi besides viruses leaving the system clean and odor-free .

Application For Dental Suction System :

For the reliable cleaning, disinfection and care it is recommended that  For one application , you should use 2 Liter  of a 5 % solution  .

  • first ,Prepare 2 liter of Alprojet-DD  5 % solution  to be ready for use .
  • We Recommend the suction of Ready To Use Solution of 1 liter per treatment unit .
  • The Spittoon Bowel Must be disinfected with at least 250ml solution .

For 1 liter preparation ( 50 ml From Alprojet-DD + 950 ML warm water )

  • Alprojet-DD is used  1 – 2  times  per day (at noon and in the evening).
  • Let take effect for at least 30 minutes .
  • The disinfectant solution of  Alprojet-DD can remain in the system until the next restart of the assembly .

Rinse aspiration tubes and spittoon bowl thoroughly with water just before starting to work.
Please follow the manufacturer‘s instructions as well .

We Recommend Rinsing the system with  at least 2 liter cold water prior to the first patient and following the expiry of the exposure time .

Furthermore ,Spittoon Bowl can be cleaned and disinfected  with other Surface disinfectant  solution or wipes ( Minuten wipes or PlastiSept Wipes  OR Alprocleaner solution

Finally, If you will use Alprojet-DD ( the daily maintenance ) and Alprojet-W ( weekly maintenance ) as  Routine Maintenance of the suction unit , maintain 2 hour interval between the cleaning and the disinfection to inhibit the neutralization reaction  between the Both solution .

 

Fields of application 

Foam-free liquid concentrate for simultaneous cleaning, disinfection, deodorization and care of all suction systems and amalgam separators

For daily cleaning and disinfection of dental aspiration systems of all designs (including saliva aspirator / with and without amalgam separator).

Active ingredient basis

Highly effective aldehyde-free, phenol-free and chlorine-free cleaning- and disinfection concentrate based on Quaternary ammonium compounds  (QAC ) , tensides  and alkaline carriers

(100 g of the solution contain): 7.5 g Dimethyl dioctyl ammonium chloride, 0.6 g Benzyl dimethyl dodecyl ammonium chloride

Compatibility

AlproJet-DD is highly compatible with materials such as plastics, rubber and non-ferrous metals , alloyed steels and others .
Finally , It is Approvals from leading device manufactures

Dental Suction unit disinfectant 

Disinfectant for dental suction systems, separators in addition to spittoon bowls and water groups.

Efficacy

  • bactericidal
  • yeasticidal
  • virus-inactivating: limited spectrum of virucidal activity according to EN 16777 against non-enveloped adeno- and noro-viruses as well as all enveloped „blood-borne“ viruses HBVHCVHIV and influenza
  • Dissolves biofilm and prevents formation of sludge through blood and proteins
  • The solution for contaminated suction systems – provides reliable protection against infection
  • certified by VAH (Association for Applied Hygiene) /DGHM (German Society for Hygiene and Micro- biology), meets the DGHM requirements and EN-standards for the disinfection of instruments
  •  Recommended by leading equipment manufacturers because  , It has Certified material compatibility .

 Disinfectant Concentrate Features :

  • Aldehyde-free ,chlorine-free and phenol-free
  • Extremely low-foaming and cleaning disinfectant concentrate based on quaternary ammonium salts.
  •  High dirt-dissolving power towards deposits , saliva residues and drilling dusts.
  • Good material compatibility.
  • Even very low concentrations are sufficient to achieve rapid effectiveness.
  • Clean , Disinfect and Deodorize
  • Environmentally friendly.
  • Manufacturer: APMD FACTORY UNDER THE LICENSE FROM ALPRO MEDICAL COMPANY IN GERMANY .
  • Pleasant odor
  • Highly effective and fast at low concentrations.
  • Low application concentration (5%)
  • Equally important , it is Ideal in combination with Alprojet-W
  • Dissolves encrustations of lime scale, prophy powder or prophylaxis pearl products
  • Highly intensive cleaning effect against deposits and sludge

Delivery form

  •  1 L
  • 5 L Canister

Accessories

  •  AlproJet MixCup.

 

The water circuit of the dental unit , which supplies water to the instruments and removes waste substances, constitutes a vehicle for the transmission of infections. This is due to the presence of biofilma complex aggregation of micro-organisms which develops inside the water mains systems: communities of bacteria from the water flow supplying the unit adhere firmly to the layer of limescale, and proliferate due to various factors which promote their growth and adhesion.

The suction circuit is also an ideal breeding ground for pathogenic micro-organisms, due to the removal of solid and liquid compounds during dental procedures. This makes the scrupulous observation of the dental unit cleaning protocol – disinfection of the suction system in particular – a vital part of dental practice.


Dental Suction System Infection :

The water circuit of the dental unit, which supplies water to the instruments and removes waste substances, constitutes a vehicle for the transmission of infections.

This is due to the presence of biofilm, a complex aggregation of micro-organisms which develops inside the water mains systems: communities of bacteria from the water flow supplying the unit adhere firmly to the layer of limescale, and proliferate due to various factors which promote their growth and adhesion.

The suction circuit is also an ideal breeding ground for pathogenic micro-organisms, due to the removal of solid and liquid compounds during dental procedures.

This makes the scrupulous observation of the dental unit cleaning protocol – disinfection of the suction system in particular – a vital part of dental practice.

The dental unit is where all medical procedures are performed on the patient. As well as being an indispensable component of the dental practice, unfortunately it is also the main vehicle of cross infections between staff and patients, both exposed to pathogenic micro-organisms carried by blood, oral and respiratory secretions and contaminated equipment.

Numerous studies have shown that the dental unit can be colonized by pathogenic micro-organisms in the form of fungi, bacteria or protozoa.

Due to the way that infections are transmitted, the critical points in dentistry are many, and stem from the multitude of microbial agents, the variety of possible infection routes, the type of instruments used, the rapid turnover of patients, and the invasive nature of the procedures performed.


 Backflow  In Dental Suction :

occur in the following situations

  •  When they use a saliva ejector holding the tubing above the patient’s head
  • When patients close their lips and form a seal around the tip of the ejector that
    creates a partial vacuum
  • When the saliva ejector is used at the same time as other evacuation (high
    volume) equipment

take measures to avoid Backflow in dental suction system .


Disinfection of the dental unit : all the steps

To drastically reduce the accumulation and proliferation of bacteria and other pathogenic micro-organisms, a dental unit maintenance protocol should be followed every day.

Frst ,At the start of the day:

  • Flushing of the suction lines with high-level disinfectant for two minutes.
  • Flushing of each instrument with water for no less than 2 minutes.

Second ,Between patients:

  • Cleaning of the surfaces.
  • Detergion and decontamination of the surfaces.
  • Flushing of each instrument with water for 20-30 seconds.
  • Flushing of the suction cannulas with high-level disinfectant for two minutes.

Lastly ,At the end of the day:

  • Flushing of the suction lines with high-level disinfectant, leaving it to act overnight if possible.
  • Flushing of each instrument with water for at least 2 minutes.
  • Cleaning of spittoon outlet filter.
  • Removal and cleaning of the suction system filter.

How to choose dental unit disinfectants

  • For effective cleaning of the dental unit on a daily basis, it is important to choose disinfectants with appropriate action times – whether rapid or more prolonged – based on the specific requirements of the equipment involved.
  • lastly , It is advisable to use mild products with a prolonged action effective against organic material.

Dental Suction Systems Maintenance  Notes :

Chlorine-based products should never be used in the suction lines since the chlorine can cause corrosion of metal components in the system.

Oxidizers have been shown to cause mercury to be released from amalgam particles, which can cause water contamination.

Disposable suction traps should be changed weekly or more often if they become clogged.

The used suction traps should not be discarded in the trash since they contain amalgam particles.

A licensed medical/hazardous waste hauler should be used to dispose of the traps, as well as amalgam capsules since they may have traces of mercury left from the mixing process.


Cleaning or disinfection: What’s right for the suction lines?

  • The evacuation system is an essential component of most dental procedures. When it is functioning properly, life is good for the clinical team and patients.
  • The first study that demonstrated the backflow potential was published in 1993. As recently as 2006, the Centers for Disease Control and Prevention issued a guideline about the use of saliva ejectors. The CDC stated that patients should not be instructed to close their lips tightly around the saliva ejector, and that suction lines should be disinfected daily.
  • Suction lines in the hygiene treatment rooms should be cleaned every day with an evacuation system cleaner to remove blood and debris, and a disinfectant that is compatible with the evacuation system should be run through the tubing.
  • The low-volume suction lines should be disinfected between patients.
  • Using a small amount of a waterline cleaner/disinfectant between patients is a good choice since the waterline cleaner/disinfectants are compatible with the evacuation system.

Advice and contact

You wish personal advice on our products or need help  ,  We are glad to be here for you.

  • E-Mail : info@apmdksa.com

 


I would like to enquire about the following product: 

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Presentation

    Video

    Characteristics

    Free of Aldehydes & Phenols
    Free of Phosphates
    Prevents foam formation
    Fresh smelling scent
    Biodegradable according to the instructions of the Organization for Economic Cooperation and Development (OECD).

    Application

    Remove cap of dosing section. Fill it with 50 mL. of AlproJet-DD by pressing bottle slightly. Dilute this volume with 950 mL. of water to make 1 Liter 5% ready to use solution. Use 5% solution to rinse the system 1-2 times daily through the spittoon bowl and suck it into the system through the suction pipes.

    Instructional Video

     

    Composition

    Less than 15% Cationic Surfactants
    Less than 5% Amphoteric Surfactants
    Less than 5% Non-ionic Surfactants
    Less than 5% Sodium Carbonate
    Dimethyldioctylammonium chloride as disinfecting agent

    Caution

    Do not mix with other cleaners or disinfectants
    Avoid contact with skin and eyes. In case of contact, rinse with plenty of water.
    The use of protective gloves is recommended

    Sizes

    1 Liter Dosage Bottle
    5 Liters

    Scientific

    •Prof. Dr. H. P. Werner, Schwerin, Viruzid (low level), 2015-01
    •Dr. H. Brill, Hamburg, VAH incl. EN 13624 + EN 13727, 2006-10; EN 14561 + EN 14562, 2006-10
    •Dr. J. Hoffler, Hamburg, EN 13624 + EN 13727, 2009-05
    •Prof. Dr. R. Schubert, Frankfurt/M., VAH incl. EN 13624 + EN 13727 + EN 14561 + EN 14562, 2007-02
    •Dr. J. Steinmann, Bremen, Adeno, 2006-05; Vaccinia, 2006-04; BVDV, 2003-11; HBsAgVerfahren,2003-10 Virusinaktivierend: behullte Viren incl. HBV, HCV, HIV, Influenza incl. (H1N1,H5N1), Herpes simplex, 2009-08