مجموعة الدبليو-ال-لمقابض اليد

التنظيف والتطهير اليدوي لأجزاء الأدوات الجراحية المجوفة(طبالأسنان & الطب العام)

WL-KIT  مجموعة الدبليو-ال تعمل علي ازالة بقايا الدم والأنسجة المتواجدة في مقابض اليد والأجزاء المجوفة داخليا.

1-الدبليو-ال المنظف للتنظيف الداخلي

2-الدبليو-ال المطهر للتطهير الواسع المجال شاملا الفيروسات المغلفة مثل فيروس كرونا .

3-الدبليو-ال المجفف أخيرا يعمل علي تجفيف السوائل المتبقية من عملة التنظيف والتطهير استعدادا لعملية التزييت .

شاهد من هنا كيف يعمل الدبليو-ال

عملية دفع آمنة مضمونة

الوصف

مجموعة دبليو-ال (المنظف-المطهر-المجفف) الخاصة بمقابض اليد بعيادات الاسنان وغيرها.

WL-KIT FOR Manual Cleaning And Disinfection For Hollow Part Instruments ( Dental  and general  Medical ) like dental handpieces ,endoscopy and others .

مجموعة الدبليو-ال تقوم بالتنظيف والتطهير والتجفيف لأي بقايا البروتين الملتصق والمحشو داخليا الذي لايمكن ازالته بالطرق المعتادة.

مقابض اليد بعيادات الاسنان جزء مهم ضمن معدات الاسنان الجراحية. مقابض اليد تتعرض بشدة للتلوث بالدم والانسجة واللعاب بصورة منتظمة زمن السهل جدا رؤية التلوث الخارجي علي مقابض اليد ولكن يتبقي السؤال الأهم وهو ماذا يحدث داخليا ؟

يجب أن تعلم أن التلوث الخارجي لمقابض اليد سهل جدا ازالته عكس الداخلي check here. 

the internal contamination occurs when the treatment procedure is interrupted resulting in re-suction. Incorrectly or poorly maintained dental unit waterlines can also introduce contamination, leaving you with internal channels that are now contaminated and a potential cross infection risk.

If no internal cleaning or disinfection has been performed, any contamination still inside the handpiece, such as blood can become “baked” into the handpiece during  sterilization .


SO Adopting a handpiece internal cleaning and disinfection protocol will future-proof your practice and protect your staff and patients .

يمكن لك الاطلاع من هنا ( استعمال الدبليو-ال ) WL SYSTEM HERE .


الدبليو-ال يتم استعمالها لأجزاء الأدوات المجوفة مثل :

1-Handpieces ( Contra-angles and straight  ones )

2-Turbines .

3-الأجهزة المبردة داخليا (المناظير)Endoscopes and others )

dental handpieces maintenance ksa
dental handpieces maintenance

dental handpieces-maintenance-apmdksa

 


Handpieces maintenance procedures after cleaning and disinfection :

1-Lubricate the handpieces.

Use the proper lubricating tip to spray oil into the drive airline. Spray until oil comes out of the handpiece head. This ensures that lubricant has penetrated to the bearings. Even if the lubricant is delivered incorrectly, oil coming from the head indicates it has reached the bearings.

2-Run the handpieces to expel excess oil.

After lubrication, it is important to run the handpiece to evenly distribute the oil through the bearings, and to expel excess oil to prevent coagulation during autoclaving.

3-Sterilizing handpieces

The acceptable methods of sterilization include chemical vapor sterilizers, dry heat, and autoclaves. Ethylene oxide gas is not recommended for dental handpieces .

What to look for in a handpiece from a sterilization aspect

Some things to consider when purchasing a handpiece:

  1. Is it designed to be autoclavable
  2. Does it have sleek, smooth designs that will not hold debris
  3. Is the finish able to withstand the sterilization process over a long period of time? Titanium withstands chemicals and the sterilization process better than chrome plate.
  4. Does it have smooth surfaces that do not trap debris and bacteria and a seamless finish with no gap between outer casings.

The mission of the National Dental Handpiece Association is to improve clients’ ability to deliver patient care by maintaining their powered instruments with exceptional service and integrity, so The above  guidelines represent a general approach to handpiece maintenance.

أود الاستفسار عن المنتج التالي: 

    هذا الموقع محمي بواسطة reCAPTCHA و Google سياسة الخصوصية و شروط الخدمة يتقدم.

    عرض

    فيديو

    المميزات

    دبليو ال كلين (1)

    NO تثبيت البروتين

    إزالة بقايا البروتين

    دبليو ال سيد (2)

    طيف من النشاط في 5 دقائق

    مبيد للجراثيم

    مبيد الفطريات

    مبيد للجراثيم

    فيروسي

    طريقة الإستخدام

    تحقق من علامة التبويب العرض. لمزيد من التوضيح

    1-WL-Clean (1) ثم  دبليو ال سيد (2)

    رش 2 مرات × 3 ثوان

    وقت الاتصال 5 دقائق

    2-WL-جاف / WL-Blow (3)

    بعد كل خطوة لإزالة بقايا مواد التنظيف والتطهير ومنتجات الصيانة

    المكونات

    WL-clean / WL-cid / WL-dry

    1- WL-Clean (1) (قائم على الماء)

    PHB- استرس

    بيجوانيد

    EDTA

    2-WL-cid (2) (قائم على الكحول)

    الكحول 60% (إيثانول ، أيزوبروبانول)

    QAC <0.1 %

    تيرت. ألكيلامين

    الكلورهيكسيدين

    3-WL-جاف / WL-Blow (3)

    • غاز نقي طبيا • قنوات رذاذ التجفيف / السطح الداخلي • يدعم التنظيف

    تحذير

     لتجنب تثبيت البروتين 

    WL-CLEAN أولاً ثم WL-CIDWL-CLEAN ، APMD WL-CID ، APMD

    علمي

    دبليو ال كلين (1) الموافقات

    1-لتنظيف قنوات الرش (الماء والهواء)

    2-للتنظيف الداخلي الكامل.

    3-لتنظيف الأدوات الجراحية المجوفة.